Round Concrete Pole Making Machine - High-Quality Supplier & Factory from China
Main Features
Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.
Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.
The speed of separation is slow when the viscosity of slurry is high.
It is good for centrifugal sedimentation when the slurry density is different in each component.
Cylinder body: The material blanking according to the customer's order model. The Maximum single length is 12m, and the cylinder body has less welding seams, which reduces the influence of welding deformation and the error of manual docking.
Running wheel: The material is adopted 30Mn cold roll forming, with good wear resistance.
Welding: It is advisable to adopt the section welding process, the welding method is carbon dioxide shielded welding, the gas is mixed gas, and the welding machine adopts Panasonic welding machine, the welding spot is beautiful, and there is no welding slag.
Lathe: Introduce CW61180L-16m ultra-long lathe, ∅1000mm×15.4M and below specifications are open for overall processing, and the concentricity of the steel mold is better.
Anti-leakage grout: Our company uses a planer for a groove at the joint between the upper mold and the body, and an elastic sealing rubber strip is inserted into the groove. This rubber strip can be reused or replaced at any time. Put an end to the problem of ground joint leakage.
Product Line
Technical Parameters
| No. | Item | Unit | Model | ||
|---|---|---|---|---|---|
| Double-wheel | Three-wheel | ||||
| 1 | Wheel thread | - | 2000 | 2000 | |
| 2 | Wheel base | mm | 950 | 950 | |
| 3 | Riding wheel external diameter | mm | 600 | 600 | |
| 4 | Riding wheel width | mm | 84 | - | |
| 5 | Angel α between wheel center and line of centers of mold | (°) | 75°-110° | ||
| 6 | Max. Length of molding concrete pole | m | 26 | 26 | |
| 7 | Max. diameter of molding concrete pole | End of conical rod | mm | 500 | 500 |
| Equal diameter rod | mm | 600 | 600 | ||
| 8 | Motor power | kW | 45kw | 55kw | |
| 9 | Speed range of final drive shaft | r/min | 60-1000 | 60-1000 | |
| 10 | Shaft diameter | mm | 130 | 130 | |
| 11 | Material of base | - | Casting steel | Casting steel | |
| Inner diameter of top end (mm) | Length (m) | Running Wheel Diameter (mm) | Tread (mm) |
|---|---|---|---|
| 150 | 6~11 | 600 | 2000 |
| 190 | 7~15 | 600 | 2000 |
| 230 | 6~12 | 650 | 2000 |
| 270 | 6~10 | 650 | 2000 |