Injin Yin Siminti Mai Zagaye - Mai Kaya Mai Inganci da Masana'anta daga China
Babban Sifofi
Idan aka ƙara slurry ɗin a cikin mold ɗin, ana tuƙa shi da sauri kuma ana juyawa a cikin irin wannan saurin na'urar. Kowane sashi ana raba shi kuma ana sakinsa a ƙarƙashin ƙarfin centrifugal. Yawanci mafi girman saurin juyawa na slurry, mafi kyawun tasirin rabuwar slurry.
Tsarin centrifugal shine amfani da nau'ikan yawa daban-daban na kowane sashi a cikin slurry, wanda ake juyawa a ƙarƙashin ƙarfin centrifugal. Don gane rabuwar ruwa - mai ƙarfi (ko ruwa - ruwa).
Saurin rabuwa yana raguwa idan danko na slurry ya yi yawa.
Yana da kyau ga centrifugal sedimentation lokacin da yawan slurry ya bambanta a kowane sashi.
Jikin silinda: Kayan da aka yi amfani da shi bisa ga tsarin odar abokin ciniki. Tsawonsa ya kai mita 12, kuma jikin silinda yana da ƙarancin dinkin walda, wanda ke rage tasirin lalacewar walda da kuma kuskuren shigar da hannu.
Tayar gudu: An yi amfani da kayan da aka yi da 30Mn sanyi mai kama da na'urar, tare da juriya mai kyau ga lalacewa.
Walda: Yana da kyau a yi amfani da tsarin walda na sashe, hanyar walda ita ce walda mai kariya daga carbon dioxide, iskar gas ɗin ta haɗu, kuma injin walda yana amfani da injin walda na Panasonic, wurin walda yana da kyau, kuma babu slag na walda.
Lathe: Gabatar da lathe mai tsayi sosai na CW61180L-16m, ∅1000mm × 15.4M da ƙasa an buɗe su don sarrafawa gabaɗaya, kuma daidaiton ƙirar ƙarfe ya fi kyau.
Maganin hana zubar jini: Kamfaninmu yana amfani da na'urar planer don rami a haɗin da ke tsakanin saman mold da jiki, kuma ana saka wani roba mai rufewa mai roba a cikin ramin. Ana iya sake amfani da wannan bututun roba ko maye gurbinsa a kowane lokaci. A kawo ƙarshen matsalar zubar da bututun ƙasa.
Layin Samfuri
Sigogi na Fasaha
| A'a. | Abu | Naúrar | Samfuri | ||
|---|---|---|---|---|---|
| Tayoyi biyu | Tayoyi uku | ||||
| 1 | Zaren tayoyi | - | 2000 | 2000 | |
| 2 | Tushen tayoyin | mm | 950 | 950 | |
| 3 | Diamita na waje na ƙafafun hawa | mm | 600 | 600 | |
| 4 | Faɗin tayoyin hawa | mm | 84 | - | |
| 5 | Angel α tsakanin tsakiyar tayoyin da layin cibiyoyin mold | (°) | 75°-110° | ||
| 6 | Matsakaicin tsawon sandar siminti ta ƙera | m | 26 | 26 | |
| 7 | Matsakaicin diamita na sandar simintin gyare-gyare | Ƙarshen sandar mazugi | mm | 500 | 500 |
| Sanda mai diamita daidai | mm | 600 | 600 | ||
| 8 | Ƙarfin mota | kW | 45kw | 55kw | |
| 9 | Nisan gudun shaft ɗin tuƙi na ƙarshe | rpm | 60-1000 | 60-1000 | |
| 10 | Diamita na shaft | mm | 130 | 130 | |
| 11 | Kayan tushe | - | Karfe mai siminti | Karfe mai siminti | |
| Diamita na ciki na ƙarshen sama (mm) | Tsawon (m) | Diamita na Tayar Gudu (mm) | Tafiya (mm) |
|---|---|---|---|
| 150 | 6~11 | 600 | 2000 |
| 190 | 7~15 | 600 | 2000 |
| 230 | 6~12 | 650 | 2000 |
| 270 | 6~10 | 650 | 2000 |