Tuluk Suppliers Factory Round Concrete Pole Making Sechine for Reinforced Cement Products
A biapi bikmi sining hna
Concrete Electric Pole Riantuannak Phunglam
Slurry chap: Thil cawhmi kha cawhnuk chungah cawh in, rang tukin a mawngh i seh rangnak tluk tein aa mer. Thilri pakhat cio cu an i tthen i centrifugal thazaang tangah an thlah hna. A tlangpi in slurry aa mernak a rang deuhdeuh ahcun, slurry tthennak tthatnak a ttha deuhdeuh.
Centrifugal sedimentation: Cu cu centrifugal thazaang tangah aa mermi thli chung i a ummi thilri pakhat cio i an rit ning aa dangmi hmannak a si. Ti - ti (asiloah ti - ti) tthennak hngalh khawhnak ding caah.
A nemmi thil: Slurry a tthawnnak a sang tikah tthennak rangnak cu a tlawm.
A ritmi thil: Slurry density cu component pakhat cio ah aa dang tikah centrifugal sedimentation caah a tha.
Centrifugal Concrete Pole Mold tthatnak
1. Cylinder pum: Chawlettu nih an halmi model ningin thilri hnawmh, A sau bikmi pakhat cu 12m a si, cun cylinder pum cu hnimhnak hri tlawm deuh a ngei, cu nih cun hnimhnak thlennak le kut in hrennak palhnak a zorter.
2. A tlikmi kedan: Mah thilri cu 30Mn cold roll sernak ah hmanmi a si, a ttha ngaimi hruk khawhnak he.
3. Welding: Section welding tuah ning hman ding in ruahnak cheuh a si, welding tuah ning cu carbon dioxide in a huhphenhmi welding a si, gas cu cawhmi gas a si, cun welding seh nih Panasonic welding seh a hman, welding hmun cu aa dawh, cun welding slag a um lo.
4. Lathe: CW61180L-16m ultra-long lathe, ∅1000mm×15.4M le a tanglei sining hna cu a dihlak in riantuannak caah on a si, cun thir cawhnak a ttha deuh.
5. A luan lonak ding caah grout: Kan company nih a cunglei tthencheunak le pum karlak i aa pehtlaimi ah tthencheunak caah tliknak seh a hman, cun tthencheunak chungah a tthawngmi kharnak rubber hri an khumh. Hi rubber hri cu zeitik caan paoh ah hman tthan khawh asiloah thlen khawh a si. Vawlei tthennak a luannak kong buainak kha donghter.
Thilri phun
Pole Spinning Machine i Technical Parameter
| A silo. | Thil | Thilrelnak ah hmanmi | Zohchunhmi | ||
|---|---|---|---|---|---|
| Ke pahnih | Ke pathum | ||||
| 1 | Ke hri | - | 2000 | 2000 | |
| 2 | Ke hram | mm | 950 | 950 | |
| 3 | Mawtaw mawnghnak kedan lenglei kauhnak | mm | 600 | 600 | |
| 4 | Mawtaw mawnghnak kedan kauhnak | mm | 84 | - | |
| 5 | Angel α cu kedan laifang le hling laifang hna karlak ah | (°) | 75°-110° | ||
| 6 | Max. Molding concrete tung sauhnak | m | 26 | 26 | |
| 7 | Max. concrete tung sernak diameter | Conical fung donghnak | mm | 500 | 500 |
| A kauhnak aa tlukmi fung | mm | 600 | 600 | ||
| 8 | Motor thazaang | km | 45kw | 55kw | |
| 9 | A donghnak mawtaw mawnghnak hri a rangnak | rpm | 60-1000 | 60-1000 | |
| 10 | Shaft diameter | mm | 130 | 130 | |
| 11 | A hrampi thilri | - | Thir thlet | Thir thlet | |
Prestressed Spun Concrete Pole Mold i Technical Parameter
| A cunglei donghnak chunglei diameter (mm) | Sauhnak (m) | A tlikmi kedan diameter (mm) | Kedan (mm) |
|---|---|---|---|
| 150 | 6~11 | 600 | 2000 |
| 190 | 7~15 | 600 | 2000 |
| 230 | 6~12 | 650 | 2000 |
| 270 | 6~10 | 650 | 2000 |