WAN Mashin fɔ Mek Brikde ple impɔtant pat pan di mɔdan kɔnstrɔkshɔn matirial prodakshɔn. We pipul dɛn de aks fɔ kɔnkrit blɔk dɛn, brik dɛn we dɛn kin yuz fɔ mek rod, brik dɛn we gɛt ol, ɛn bildin matirial dɛn we nɔ de pwɛl di wɔl, mɔ ɛn mɔ faktri dɛn de yuz ɔtomɛtik Blɔk Mashins ɛn kɔmplit brik prodakshɔn layn dɛn fɔ mek di prodakshɔn efyushɔn bɛtɛ.

Bɔt we dɛn de wok fɔ lɔng tɛm, di mashin dɛn we dɛn de mek brik kin gɛt difrɛn prɔblɛm dɛn bikɔs dɛn nɔ de wok fayn, dɛn gɛt prɔblɛm wit di tin dɛn we dɛn de yuz, di ikwipmɛnt dɛn west, ɔ dɛn nɔ de mentenɛns dɛn fayn.

Prɔblɛm dɛn we kin apin na:

• Brik mek mashin we nɔ de mek brik;
• Low haydrolik prɛshɔn;
• Brik trɛnk we nɔ fayn;
• Brik surface we nɔ ivin;
• Otomatik sistem we nɔ wok;
• Mashin de shek shek ɔ nɔys pasmak.

Fɔ ɔndastand dɛn tin ya kɔmɔn brik mek mashin prɔblɛm ɛn sɔlv dɛm kin ɛp di wan dɛn we de wok fɔ no di prɔblɛm dɛn kwik kwik wan, fɔ ridyus di tɛm we di mashin nɔ de wok, ɛn fɔ mek di prodakshɔn stebul.

1. Brik Mek Mashin Nɔ Ebul fɔ Prodyuz Brik

Di Kɔmɔn Simptom dɛn

Wan pan di prɔblɛm dɛn we di wan dɛn we de wok de ripɔt na dat di mashin de rɔn nɔmal wan bɔt i nɔ ebul fɔ mek brik dɛn we kwalifay.

Di tin dɛn we kin apin we pɔsin kin si am na:

• Di mold nɔ de mek kɔmplit brik;
• Brik dɛn kin lɔs ɔ brok afta dɛn dɔn mol dɛn;
• Di fidin sistɛm nɔ kin ebul fɔ gi inof matirial;
• Di prodakshɔn efyushɔn kin go dɔŋ wantɛm wantɛm.

Di tin dɛn we kin mek i bi

Bɔku rizin dɛn de we kin apin:

1. Raw Material Mixture we nɔ kɔrɛkt

Di kwaliti fɔ brik dɛn dipen bad bad wan pan di raw matirial rishɔ. If dɛn nɔ miks simen, san, ston paoda, flay ashin, ɔ ɔda tin dɛn fayn, di mashin nɔ go ebul fɔ mek strɔng brik.

2. Prɔblɛm dɛn we de na di Fidin Sistɛm

If di matirial fidin sistem blok ɔ di fidin spid nɔ kɔrɛkt, di mold nɔ go gɛt inof matirial.

3. Prɔblɛm dɛn we gɛt fɔ du wit Mold

Mold we dɔn pwɛl ɔ dɔti kin afɛkt di brik shep ɛn di we aw dɛn mek am kɔrɛkt wan.

Sɔlv dɛn fɔ sɔlv di prɔblɛm

Fɔ sɔlv dis prɔblɛm:

• Chek ɛn ajɔst di raw matirial fɔmula;
• Klin di fidin sistɛm ɔltɛm;
• Inspek di kɔndishɔn we di mold de;
• Adjɔst di tɛm fɔ it ɛn di vaybreshɔn paramita dɛn.

If yu pripia di tin dɛn fayn fayn wan ɛn we yu de luk am ɔltɛm, dat kin mek bɔku prɔblɛm dɛn we de fɔ mek brik mashin nɔ apin.

2. Haydrolik Brik Mashin Gɛt Lɔw Prɛshɔn

Haydrolik sistem na wan pan di impɔtant pat dɛn fɔ di mashin dɛn we dɛn de yuz fɔ mek brik tide. If yu nɔ gɛt prɛshɔn, dat kin afɛkt di brik dɛnsiti ɛn di trɛnk dairekt wan.

Di Kɔmɔn Simptom dɛn

• Brik dɛn kin brok izi wan;
• Brik trɛnk nɔ de mit di tin dɛn we dɛn nid;
• Di mashin prɛs prɔses nɔ kin stebul;
• Di haydrolik silinda de muv sloslo.

Di tin dɛn we kin mek i bi

Low Haydrolik Ɔyl Lɛvɛl

If yu nɔ gɛt bɛtɛ haydrolik ɔyl, dat kin mek di sistɛm prɛshɔn go dɔŋ ɛn afɛkt di we aw di mashin de wok.

Haydrolik Ɔyl Kɔntaminɛshɔn

Dɔti haydrolik ɔyl kin pwɛl di pɔmp dɛn, valv dɛn, ɛn ɔda tin dɛn.

Haydrolik Pɔmp we nɔ de wok

Haydrolik pɔmp we dɔn pwɛl nɔ go ebul fɔ gi inof prɛshɔn fɔ mek dɛn ebul fɔ mol brik.

Seal Wear we yu de wɛr

Di haydrolik sil dɛn we dɔn ol kin mek di ɔyl lik ɛn prɛshɔn kin lɔs.

Di we aw fɔ sɔlv prɔblɛm dɛn

Di wan dɛn we de ɔpreshɔn fɔ:

• Chek di haydrolik ɔyl lɛvɛl ɔltɛm;
• Riples haydrolik ɔyl akɔdin to di mentenɛns schedule;
• Inspek di haydrolik paip ɛn kɔnɛkshɔn dɛn;
• Riples di sil ɛn komponent dɛn we dɔn pwɛl.

Rigyul haydrolik sistem mentenɛns impɔtant fɔ mek di wok efyushɔn fɔ a mashin fɔ mek brik we gɛt haydrolik.

3. Poor Brik Kwaliti Afta Prodakshɔn

Ivin if di mashin de wok nɔmal wan, di brik kwaliti nɔ kin stil apin.

Prɔblɛm dɛn we Kɔmɔn

• Krak krak dɛn kin apia pan brik dɛn;
• Brik surface dɛn nɔ kin ivin;
• Brik ed dɛn dɔn pwɛl;
• Brik trɛnk nɔ go du fɔ am.

Di Men Tin dɛn we De Mek

Kwaliti fɔ Raw Matirial

Matirial dɛn we nɔ gɛt bɛtɛ kwaliti ɔ we nɔ kɔrɛkt kin mek di fayn prodakt strɔng.

Prɛshɔn Sɛtin dɛn we Nɔ Kɔrɛkt

If di prɛshɔn fɔ mold tu smɔl, brik dɛn nɔ kin kɔmpakt inof.

Di Prɔses fɔ Kɔrɔs we Nɔ Fayn

Afta dɛn dɔn mol di brik dɛn, dɛn nid di rayt tɛm ɛn kɔndishɔn fɔ mek dɛn wɛl fɔ mek dɛn gɛt di trɛnk we dɛn nid.

Sɔlv dɛn fɔ sɔlv di prɔblɛm

Di wan dɛn we de mek ɛn di wan dɛn we de wok fɔ:

• Optimayz raw matirial rεshכn;
• Adjɔst di prɛshɔn we dɛn de mek fɔ mek di moldin kɔrɛkt wan;
• Impruv di we aw dɛn de mɛn pipul dɛn;
• Chek di mashin vaybreshɔn ɛn mold paramita dɛn.

Fɔ mek di wan ol prodakshɔn wok kɔrɛkt, nɔto jɔs di mashin insɛf impɔtant.

4. Ɔtomatik Brik Mek Mashin Opareshɔn Prɔblɛm dɛn

Bɔku faktri dɛn we de naw de yuz am mashin dɛn we dɛn kin yuz fɔ mek brik ɔtomɛtik wan ɛn ful ɔtomɛtik brik prodakshɔn layn fɔ ridyus di leba kɔst ɛn inkrisayz di autput.

Bɔt sɔntɛnde, ɔtomɛshɔn sistem dɛn kin gɛt prɔblɛm.

Isyu dɛn we Kɔmɔn

• Mashin kin stɔp wantɛm wantɛm;
• Alam signal dɛn de apia;
• Sɛns dɛn nɔ de ansa;
• Prodakshɔn layn ɔpreshɔn kin bi tin we nɔ stebul.

Di tin dɛn we kin mek i bi

• Ilɛktrik sistɛm prɔblɛm dɛn;
• Sɛns we nɔ de wok fayn;
• PLC kɔntrol mistek dɛn;
• Lus waya kɔnɛkshɔn dɛn.

Kwik Inspekshɔn

Di wan dɛn we de wok fɔ chɛk:

• Kontrol di kɔndishɔn na di kabinɛt;
• Sɛns pozishɔn;
• Ilektrikal kɔnɛkshɔn dɛn;
• PLC program ɔpreshɔn.

If yu de chɛk di ilɛktrik kɔmpɔnɛnt dɛn ɔltɛm, dat kin mek yu nɔ gɛt ɛnitin fɔ du wit di prodakshɔn we yu nɔ bin de ɛkspɛkt.

5. Brik Mek Mashin De Prodyuz Bɔku Nɔys

Nɔys we nɔmal kin bi sayn we de wɔn pipul dɛn we de sho se sɔm pat dɛn nid fɔ inspɛkt.

Di Kɔmɔn Kɔz dɛn

• Lus mashin pat dɛn;
• Nɔ gɛt lɔbrikɛshɔn;
• Moto bia wear;
• Prɔblɛm dɛn we de na di haydrolik sistɛm.

Sɔlv dɛn fɔ sɔlv di prɔblɛm

Di tin dɛn we dɛn kin du we dɛn kin du:

• Tayt di bolt ɛn komponent dɛn we nɔ tay;
• Ad di rayt lɔbrikɛshɔn;
• Chek di motoka biɛrin dɛn;
• Inspek di haydrolik komponent dɛn.

If yu nɔ pe atɛnshɔn to di nɔys we nɔ kɔmɔn fɔ lɔng tɛm, dat kin mek big big ikwipmɛnt nɔ wok ɛn yu kin spɛn bɔku mɔni fɔ mek dɛn ripɛnt.

6. Aw fɔ Mek Brik Mek Mashin ɛn Ridyus di Failure?

Fɔ mek di mashin mentenɛns ɔltɛm na wan pan di bɛst we fɔ mek di mashin liv lɔng ɛn fɔ mek dɛn nɔ ripɛnt am.

Mentɛnans ɛvride

Di wan dɛn we de ɔpreshɔn fɔ:

• Klin mold dɛn afta dɛn dɔn mek am;
• Rimov di tin dɛn we lɛf;
• Chek di ɔyl we de lik;
• Wach sawnd ɔ vaybreshɔn we nɔ kɔmɔn.

Mentɛnans ɛvri wik ɔ ɛvri mɔnt

Di chɛk dɛn we dɛn kin se na:

• Haydrolik ɔyl kɔndishɔn;
• Ilɛktrik sistɛm pefɔmɛns;
• Wear pat dɛn kɔndishɔn;
• Mold akkuracy;
• Fastener taytnɛs.

Gud mentenɛns abit kin mek di prodakshɔn stebul ɛn ridyus di tɛm we dɛn nɔ bin de ɛkspɛkt.

7. Aw fɔ Pik Wan Mashin fɔ Mek Brik we Yu Go abop pan?

Ekwipmɛnt kwaliti gɛt dairekt impak pan prodakshɔn efyushɔn. Fɔ pik pɔsin we gɛt ɛkspiriɛns brik mek mashin manifakta kin ɛp di kɔstɔma dɛn fɔ avɔyd bɔku prɔblɛm dɛn we go kam tumara bambay.

Wan pɔshɔnal saplay fɔ gi:

• Brik mashin dɛn we gɛt ay kwaliti;
• Kastomayz prodakshɔn sɔlvishɔn dɛn;
• Instɔlɛshɔn gayd;
• Ɔpreshɔn trenin;
• Spare pats sɔpɔt;
• Afta-sɛl tɛknikal savis.

Wan manifakta we pɔsin kin abop pan nɔ kin jɔs sɛl ikwipmɛnt bɔt i kin ɛp di kɔstɔma dɛn bak fɔ gɛt lɔng tɛm stebul prodakshɔn.

 

Kɔnklushɔn: Impruv Prodakshɔn Efyushɔn Tru Prɔpa Trobul Sɔlv

Fɔ ɔndastand brik mek mashin we dɛn kin yuz fɔ sɔlv prɔblɛm dɛn impɔtant fɔ ɛvri pɔsin we de wok wit brik faktri. Bɔku tɛm, dɛn kin sɔlv prɔblɛm dɛn lɛk lɔw prɛshɔn, brik kwaliti we nɔ fayn, we mashin kin stɔp, ɛn we di haydrolik nɔ wok fayn, dɛn kin sɔlv dɛn kwik kwik wan bay we dɛn inspɛkt dɛn kɔrɛkt wan ɛn mentenɛns dɛn.

Fɔ mentenɛns ɔltɛm, fɔ ɔpreshɔn di rayt we, ɛn fɔ sɔpɔt pɔsin we sabi du in wok kin rili ridyus di tɛm we di ikwipmɛnt dɛn nɔ de wok ɛn i kin mek di prodakshɔn wok fayn.

Ilɛksɛf yu de wok na smɔl brik faktri ɔ big ɔtomɛtik brik prodakshɔn layn, if yu pik di rayt ikwipmɛnt ɛn mentenɛns am fayn, dat go ɛp fɔ mek shɔ se di prodakshɔn stebul, efyushɔn, ɛn fɔ lɔng tɛm.