Hot Products
0102030405
China Concrete Pole Spinning Machines Suppliers - High-Quality Factory Equipment for Reinforced Concrete Production
Main Features
For clamping the joint in the process of the mold running wheels due to imprecise over end of a round, mold pulp mold is not straight caused by accumulated more, cause mold beat, intensifying the centrifuge roller and die wear and damage, in the process of production to strengthen the attention.
Meanwhile, the centrifuge base wheel should be paid more attention to wheel shift will affect the service life of the mold running wheel, serious lead to fly, to be highly valued. Centrifuge is driven by motor drive shaft rotating, make the centrifugal active wheel rotate, active wheel friction produced by touching with the mold running wheel driven the mold rotate. In the process of mold rotation, the concrete in the mold under the action of centrifugal force is uniformly distributed along the mold inwall, and close-grained, gradually through the low speed, middle low, medium, medium high, high-speed stage centrifugal molding, to make the concrete, steel effectively combine to form a reinforced concrete pole preliminary. Due to the working principle of centrifuge is through the mold with the center line of the itself as the axis of rotation of the centrifugal force to make concrete centrifugal molding, so the mold running wheel axis roundness and straightness for mold centrifugal molding is of great significance.
For clamping the joint in the process of the mold running wheels due to imprecise over end of a round, mold pulp mold is not straight caused by accumulated more, cause mold beat, intensifying the centrifuge roller and die wear and damage, in the process of production to strengthen the attention.
Meanwhile, the centrifuge base wheel should be paid more attention to wheel shift will affect the service life of the mold running wheel, serious lead to fly, to be highly valued.
Frequently Asked Questions
What causes mold beat and centrifuge roller wear?
It is primarily caused by clamping the joint in the process of the mold running wheels due to imprecise over end of a round, and mold pulp accumulation causing the mold to not be straight. This intensifies the wear and damage of the centrifuge roller and die.
Why is it important to monitor the centrifuge base wheel shift?
Wheel shift will directly affect the service life of the mold running wheel and can lead to serious flying issues, making it highly important to monitor and value during production.
How does the centrifuge drive the mold to rotate?
The centrifuge is driven by a motor drive shaft that rotates the centrifugal active wheel. The friction produced by the active wheel touching the mold running wheel then drives the mold to rotate.
How is concrete distributed inside the mold during rotation?
Under the action of centrifugal force, the concrete is uniformly distributed along the mold's inner wall. It becomes close-grained as it passes through low, middle-low, medium, medium-high, and high-speed centrifugal molding stages.
What is the basic working principle of the centrifuge?
The working principle is to use the mold's center line as the axis of rotation. The centrifugal force makes the concrete and steel effectively combine to form a preliminary reinforced concrete pole. Thus, the mold running wheel axis roundness and straightness are of great significance.