High Efficiency SY7-10 Hydraulic Automatic Clay Brick Making Machine from China Suppliers and Factory
Main Features
Full automatic hydraulic adobe blocks making machine can produce various interlocking bricks by changing moulds.
Making 7 bricks at one time, and shaping cycle only 8~10 seconds, so the daily capacity as high as 20000 pieces/8hours.
Best Choice for Large-scale Block Factory.
Hydraulic pressure technology is adopted by this machine, the pressure can be as high as 60Mpa, so the blocks produced are of good quality, large density and high strength.
Four guidepost, the moulds rise/drop steadily.
Adopt the proportional valves, can adjust the pressure through PLC control system.
There are two oil cylinder on top mould and one oil cylinder under down mould, up and down press at same time, the brick is much stonger.
There is the touch screen attached in PLC control box, can adjust the pressure through the touch screen, it is so easy.
Adopt the plunger pump and proportional valves, the pressure is double. All mould use precise wire cutting and carburizing heat treatment to prolong its service life.
The machine frame is made of special thick steel and using special welding techniques. The whole machine is strong and durable.
100Ton-120Ton Hydraulic Press, High Strength of Interlocking Brick and pavers.
Product Specification
| Product Name | LC7-10 interlocking brick machine |
|---|---|
| Dimension | 2660 x 1900 x 2380 mm |
| Shifting cycle | 7-10s |
| Shifting method | Hydraulic pressure |
| Power | 18.5 kw |
| Pressure | 30-35 mpa |
| Total Mass | 2900 kgs |
| Rate voltage | 380v-440v as request |