- Imikhiqizo
- Umugqa Wokukhiqiza Wezinsika
- Umshini Wokuvimba
- umshini wokwenza amabhlogo ekhonkrithi
- Umshini wokwenza amabhlogo e-hydraulic
- Umshini wokwenza ibhloko ozenzakalelayo we-semi-othomathikhi
- umshini wokwenza amabhlogo obumba
- umshini wokwenza ibhulokhi othomathikhi
- Umshini wokwenza amabhlogo kagesi
- Umshini wokwenza amabhlogo kadizili
- Isixubi
- Isilo sikasimende
I-China TDCM175-80A Blender: I-Drum Concrete Mixer Elula Evela Kubahlinzeki Abathembekile Nasefektri Yokusetshenziswa Kwe-DIY Nezimboni
Izici Eziyinhloko
Ukusebenza Okuzinzile Nokusebenza Kahle Umsindo ophansi, ukusetshenziswa kwamandla okuphansi, ukusebenza okuzinzile, futhi kulula ukuyisebenzisa. Yakhelwe ukugcina ukusebenza kahle okuphezulu ngenkathi igcina izindleko zokusebenza ziphansi.
Ukuhamba Okuphezulu Namandla Azimele Ukuxuba okufanayo ngesivinini sokukhipha esisheshayo. Ifakwe amathayi aqinile kanye nesakhiwo esilula nesithembekile esinyakazayo. Ingasebenza ngokujwayelekile ngisho noma ingenawo ugesi wangaphandle.
Amapharamitha Obuchwepheshe
| Imodeli | I-TDCM175-6DA |
|---|---|
| Ivolumu Yonke Yesigubhu (amalitha) | 580 |
| Umphumela Ngehora (m³) | 4.5 |
| Ukuzungezisa Izigubhu (rpm) | 21 - 25 |
| Injini | R180, Udizili, amandla okuqalisa ngesandla angu-5.67kw |
| Ubukhulu Besigubhu Sensimbi (mm) | 4 |
| Isisindo (kg) | 580 kg |
| Usayizi Ophelele (mm) | 3720(L) x 1160(W) x 1860(H) |
Imibuzo Evame Ukubuzwa (Imibuzo Evame Ukubuzwa)
Ungakanani umthamo wesigubhu esiphelele somxube we-TDCM175-6DA?
Umthamo wesigubhu ophelele walo modeli wokuxuba ukhonkolo ungamalitha angu-580, okunikeza amandla anele okuxuba imisebenzi yokuxuba ephakathi kuya kwenkulu.
Ingabe lo mshini wokuxuba ukhonkolo ungasebenza ngaphandle kokunikezwa kwamandla kagesi?
Yebo, ingakwazi. I-mixer ifakwe injini yedizili engu-R180 ezimele, eyivumela ukuthi isebenze kahle ezindaweni zokwakha ezikude ngaphandle kokufinyelela ugesi.
Ungakanani umthamo wokukhipha ngehora walo mshini?
Lo mshini unamandla okukhipha amandla asebenza kahle kakhulu angama-cubic metres angu-4.5 (m³) ngehora.
Ingabe kulula ukuhambisa umshini wokuxuba ukhonkolo endaweni yokusebenza?
Impela. Inesakhiwo esilula nesithembekile esithuthwayo esifakwe amathayi aqinile, okwenza ukuthuthwa kusuka endaweni kuya kwenye kusheshe futhi kube lula.
Uhlobo luni lwenjini olusetshenziswa yi-TDCM175-6DA?
Isebenzisa injini yedizili enamandla engu-R180 enohlelo lokuqalisa ngesandla olunamandla angu-5.67kw ukuze inikeze amandla aqinile futhi athembekile.
Ingakanani ijubane lokujikeleza kwesigubhu sokuxuba?
Isigubhu sijikeleza ngesivinini esingama-21 kuya kwangu-25 ngomzuzu (rpm), okuqinisekisa ukuxubana okufanayo nokukhipha ngokushesha.