Hot Products
0102030405
High-Quality Round Concrete Pole Making Machine from Reliable China Suppliers and Factory
Main Features
Concrete Electric Pole Working Principle
Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.
Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.
The speed of separation is slow when the viscosity of slurry is high.
It is good for centrifugal sedimentation when the slurry density is different in each component.
Advantages of Centrifugal Concrete Pole Mold
Cylinder body: The material blanking according to the customer's order model, The Maximum single length is 12m , And the cylinder body has less welding seams ,which reduces the influence of welding deformation and the error of manual docking.
Running wheel: The material is adopted 30Mn cold roll forming, with good wear resistance.
Welding: It is advisable to adopt the section welding process, the welding method is carbon dioxide shielded welding, the gas is mixed gas, and the welding machine adopts Panasonic welding machine, the welding spot is beautiful, and there is no welding slag.
Lathe: Introduce CW61180L-16m ultra-long lathe, ∅1000mm×15.4M and below specifications are open for overall processing, and the concentricity of the steel mold is better.
Anti-leakage grout: Our company uses a planer for a groove at the joint between the upper mold and the body, and an elastic sealing rubber strip is inserted into the groove. This rubber strip can be reused or replaced at any time. Put an end to the problem of ground joint leakage.
Product Line
Technical parameter of pole spinning machine
| No. | Item | Unit | Model | ||
|---|---|---|---|---|---|
| Double-wheel | Three-wheel | ||||
| 1 | Wheel thread | 2000 | 2000 | ||
| 2 | Wheel base | mm | 950 | 950 | |
| 3 | Riding wheel external diameter | mm | 600 | 600 | |
| 4 | Riding wheel width | mm | 84 | - | |
| 5 | Angelα between wheel center and line of centers of mold | (°) | 75°-110° | ||
| 6 | Max.Length of molding concrete pole | m | 26 | 26 | |
| 7 | Max.diameter of molding concrete pole | End of conical rod | mm | 500 | 500 |
| Equal diameter rod | mm | 600 | 600 | ||
| 8 | Motor power | km | 45kw | 55kw | |
| 9 | Speed range of final drive shaft | r/min | 60-1000 | 60-1000 | |
| 10 | Shaft diameter | mm | 130 | 130 | |
| 11 | Material of base | Casting steel | Casting steel | ||
Technical parameter of prestressed Spun Concrete Pole Mold
| Inner diameter of top end(mm) | Length(m) | Running Wheel Diameter(mm) | Tread(mm) |
|---|---|---|---|
| 150 | 6~11 | 600 | 2000 |
| 190 | 7~15 | 600 | 2000 |
| 230 | 6~12 | 650 | 2000 |
| 270 | 6~10 | 650 | 2000 |
Frequently Asked Questions
What is the working principle of the concrete electric pole machine?
It operates on the principle of centrifugal sedimentation. Slurry is added into the mould, which is rotated at high speeds. The centrifugal force separates and releases the liquid-solid components. A higher rotation speed generally results in a better slurry separation effect.
How does the mold design prevent concrete grout leakage?
A specialized groove is planed at the joint between the upper mold and the main body. An elastic sealing rubber strip is inserted into this groove, which effectively prevents joint leakage and can be easily reused or replaced.
What materials are used for the running wheels and the base?
The running wheels are manufactured using 30Mn cold roll forming for high wear resistance, while the base of the machine is constructed from durable casting steel.
What is the maximum length of concrete poles that can be produced?
The spinning machine can mold concrete poles with a maximum length of up to 26 meters. The cylinder body mold components can be produced with a maximum single length of 12 meters to minimize welding seams.
How does the welding process ensure structural integrity?
We utilize a section welding process with carbon dioxide mixed gas shielded welding, powered by Panasonic welding machines. This method ensures clean, slag-free, and aesthetically precise welding spots with minimized manual errors.