Hot Products
0102030405
China SY7-10 Hydraulic Automatic Clay Brick Block Making Machine - Leading Suppliers & Factory for Quality Solutions
Main Features
SY7-10 Advantages
1. Function
Full automatic hydraulic adobe blocks making machine can produce various interlocking bricks by changing moulds.
2. Large Capacity
Making 7 bricks at one time, and shaping cycle only 8~10 seconds, so the daily capacity as high as 20000 pieces/8hours. Best Choice for Large-scale Block Factory.
3. Advanced Technology
Hydraulic pressure technology is adopted by this machine, the pressure can be as high as 60Mpa, so the blocks produced are of good quality, large density and high strength. Four guidepost, the moulds rise/drop steadily.
4. PLC Control System
Adopt the proportional valves, can adjust the pressure through PLC control system. There are two oil cylinder on top mould and one oil cylinder under down mould, up and down press at same time, the brick is much stronger. There is the touch screen attached in PLC control box, can adjust the pressure through the touch screen, it is so easy.
5. High Quality Mould
Adopt the plunger pump and proportional valves, the pressure is double. All mould use precise wire cutting and carburizing heat treatment to prolong its service life. The machine frame is made of special thick steel and using special welding techniques. The whole machine is strong and durable.
6. Hydraulic Press
100Ton-120Ton Hydraulic Press, High Strength of Interlocking Brick and pavers.
Product Specification
| Product Name | LC7-10 interlocking brick machine |
| Dimension | 2660x1900x2380mm |
| Shifting cycle | 7-10s |
| Shifting method | Hydraulic pressure |
| Power | 18.5kw |
| Pressure | 30-35mpa |
| Total Mass | 2900kgs |
| Rate voltage | 380v-440v as request |
Frequently Asked Questions (FAQ)
What types of bricks can the SY7-10 machine produce?
The SY7-10 is a fully automatic hydraulic adobe blocks making machine that can produce various interlocking bricks and pavers simply by changing the moulds.
What is the production capacity of this interlocking brick machine?
It can make 7 bricks at one time with a shaping cycle of only 8 to 10 seconds. This allows for a high daily production capacity of up to 20,000 pieces per 8-hour shift, making it an ideal choice for large-scale block factories.
How does the hydraulic system ensure high-quality bricks?
The machine utilizes advanced hydraulic pressure technology with a 100Ton-120Ton press capacity (up to 60Mpa pressure). It features two oil cylinders on the top mould and one on the bottom mould to press simultaneously from both directions, producing high-density, high-strength interlocking bricks.
How is the PLC control system operated?
The PLC control system uses proportional valves to regulate pressure, which can be easily adjusted via the attached touch screen on the control box for user-friendly operation.
What makes the machine frame and moulds durable?
All moulds undergo precise wire cutting and carburizing heat treatment to extend their service life. The main machine frame is constructed from special thick steel and assembled using advanced welding techniques to ensure overall strength and durability.
What are the power and voltage specifications for the LC7-10?
The machine is powered by an 18.5kw motor and supports a rated voltage of 380V to 440V, customizable based on your specific power grid requirements.